Arc’teryx QC Check: Label, Seams and Zippers in QC Photos
By Chen Hong Jie · Updated · 4 min · Français (CA)
Quick answer
For an Arc’teryx jacket, first check the white product label in the main front pocket or around the inner waist: it should show the model, colour and size you ordered. Then check the zippers, the taped seams inside waterproof shells, the hood, cuffs and drawcords, and compare the flat chest measurement with the size chart. QC photos cannot prove authenticity.
Independent site. Check QC is not affiliated with Arc’teryx. Arc’teryx and its logo are trademarks of their owner. This report helps you check that the jacket in your QC photos matches what you ordered and is in good condition. A QC photo cannot prove authenticity.
To check an Arc’teryx jacket in QC photos, start with the white product label: it should match the model, colour and size you ordered. Then check the parts that make a technical jacket work, which are the zippers, the taped seams inside waterproof shells, the hood and the cuffs, and compare the flat chest measurement with the size chart. The report table at the end of this page lists every check in order.
What should I check in Arc’teryx QC photos?
First, the white product label in the main front pocket or around the inner waist: model, colour and size must match your order. Then check the zippers, the taped seams inside waterproof shells, the hood, cuffs and drawcords, and compare the flat chest measurement with the size chart. QC photos cannot prove authenticity.

1. Read the white product label
Arc’teryx says its products have a white product label in the main front pocket or around the inner waist area, with a model number in a format such as ####-#####-MM/YY (older products can differ). It is usually not in the standard QC photos, so ask for it:
- a sharp, well-lit photo of the whole label;
- the model name and colour compared with the listing;
- the size compared with what you ordered.
If the label shows a different model, colour or size, that is a wrong-item RL.
2. Zippers
Zippers are the part most likely to fail on a technical jacket. Ask for a photo with every zipper closed, including chest pockets and underarm vents if the model has them. A short video of the main zipper going up and down is better than a photo. Bent teeth, a pull that doesn’t close, or a zipper that splits open behind the slider is an RL.
3. Seams, hood and cuffs
- Inside seams on waterproof shells: the seams are covered with tape on the inside. Ask for a photo of the inside of the shoulders and the hood. The tape should be flat and continuous, with no lifted or bubbling edges.
- Insulated jackets: look for even filling, with no flat or empty sections.
- Hood: adjusters and drawcords present and working, and the brim sits straight.
- Cuffs: hook-and-loop tabs sewn on straight and fastening.
- Logo: the embroidered logo is complete, centred where the store photos show it, and has no loose threads.
4. Measurements and fit
Ask for a flat chest measurement from armpit to armpit, and the back length. Multiply the chest by two and compare it with the chest on the size chart for that model. About 2 cm of difference is normal. More than 4 cm usually means the wrong size, and an exchange is worth it before the jacket leaves the warehouse.
What QC photos can’t tell you
QC photos show visible condition and whether the jacket matches the order. They can’t show authenticity, whether the jacket is really waterproof, or how warm it is. Arc’teryx says it is working on an extra authenticity feature. If you need a guaranteed genuine jacket, buy from Arc’teryx or an authorised retailer.
Arc’teryx QC report
Copy this table and fill in the last column for your jacket.
| Check | What to look for | Result (OK / more photos / RL) |
|---|---|---|
| Product label | Model, colour and size match your order | |
| Zippers | All close smoothly; no bent teeth or split slider | |
| Inside seams (shells) | Tape flat and continuous, no lifted edges | |
| Filling (insulated) | Even, no empty sections | |
| Hood and cuffs | Adjusters, drawcords and tabs present and straight | |
| Logo | Complete, in the right place, no loose threads | |
| Chest measurement | Within about 2 cm of the size chart |
If any line says "more photos", ask your agent before you decide. Our message generator writes the request in English and Chinese, and the jacket checklist covers the general points for any coat.
Source
- Arc’teryx: Your product is authentic (product label location and model number format). Checked on 6 November 2026.
Frequently asked questions
+Where is the label on an Arc’teryx jacket?
Arc’teryx says its products have a white product label in the main front pocket or around the inner waist area. Ask your agent for a sharp photo of that label in good light.
+Does the Arc’teryx label prove the jacket is authentic?
No. The label helps you check that the model, colour and size match your order, but QC photos cannot prove authenticity. Arc’teryx says it is working on an extra authenticity feature; for a guaranteed genuine jacket, buy from Arc’teryx or an authorised retailer.
+How do I check the size of an Arc’teryx jacket in QC photos?
Ask for a flat chest measurement from armpit to armpit and multiply it by two, then compare it with the chest on the size chart for the model. A difference of about 2 cm is normal; more than 4 cm usually means the wrong size.
+What should I check on a waterproof Arc’teryx shell?
Ask for a photo of the inside: the seams of a waterproof shell are covered with tape, which should be flat and continuous with no lifting edges. Also check that every zipper runs smoothly, ideally in a short video.
+Which photos should I ask for on an Arc’teryx jacket?
The white product label, the inside seams, every zipper closed, the hood and its adjusters, the cuffs, the logo, and a flat chest measurement. Our message generator writes the request in English and Chinese.